Irrigation, Sprinkler Systems, Lawn Services

Irrigation

Irrigation Garland Texas

Irrigation Garland Texas

Irrigation Garland Texas – Irrigation Systems in Garland TX

Millikens Irrigation can provide you with a professionally designed irrigation system in Garland Texas and all surrounding areas. We install irrigation systems that efficiently distribute the exact amount of water necessary for your specific landscape.

A well designed irrigation system is as critical for having a healthy landscape and for conservation of water during the Summer months in Texas.

How does an in-ground irrigation system work?

Most commercial and residential irrigation systems are “in ground” systems. This means that the systems are installed and buried under ground. All pipes, sprinklers, emitters and drippers, and irrigation valves are hidden so it makes for a nice clean landscape design.

Controllers – Zones – Valves

Most irrigation systems are divided into zones. A zone is a single irrigation valve and one or a group of drippers, or sprinklers that are connected by pipes or tubes.

Click here for sprinkler repair in Garland TX

Irrigation systems are divided into zones because there is usually not enough pressure and available flow to run sprinklers for an entire yard or sports field at once. Each zone has a solenoid valve on it that is controlled via wire by an irrigation controller. The irrigation controller is either a mechanical or electrical device that signals a zone to turn on at a specific time and keeps it on for a specified amount of time.

Smart Controllers

“Smart Controller” is the modern term for a controller that is capable of adjusting the watering time by itself in response to current environmental conditions, such as our regular drought conditions during the Summer in Garland Texas.

The smart controller determines current conditions by means of historic weather data for the local area, a soil moisture sensor that monitors water potential or water content, rain sensor, or in more sophisticated systems satellite feed weather station, or a combination of these.

When a zone comes on, the water flows through the lateral lines and ultimately ends up at the irrigation emitter (drip) or sprinkler heads. Many sprinklers have pipe thread inlets on the bottom of them which allows a fitting and the pipe to be attached to them. The sprinklers are usually installed with the top of the head flush with the ground surface. When the water is pressurized, the head will pop up out of the ground and water the desired area until the valve closes and shuts off that zone. Once there is no more water pressure in the lateral line, the sprinkler head will retract back into the ground. Emitters are generally laid on the soil surface or buried a few inches to reduce evaporation losses.

Common Problems With Irrigation Systems

Underirrigation, or irrigation giving only just enough water for the plant, like in drip line irrigation, can give poor soil salinity control which leads to increased soil salinity with consequent build up of toxic salts on soil surface in areas with high evaporation.

Over irrigation because of poor distribution uniformity or management wastes water, chemicals, and may lead to water pollution.

Deep drainage from over-irrigation could cause rising water tables which in some instances will lead to problems of irrigation salinity requiring watertable control by some form of subsurface land drainage.

If you need help with irrigation system planning, installation or need Irrigation System Repair in Garland Texas, give us a call today.

We can help you in every stage of all irrigation system related issues.

Check Out our Reviews on Google for Irrigation in Garland Texas

Irrigation Rowlett TX

Irrigation Rowlett Texas

Irrigation Rowlett Texas – Irrigation Systems in Rowlett TX

Millikens Irrigation can provide you with a professionally designed irrigation system in Rowlett Texas and all surrounding areas. We install irrigation systems that efficiently distribute the exact amount of water necessary for your specific landscape.

A well designed irrigation system is as critical for having a healthy landscape and for conservation of water during the Summer months in Texas.

How does an in-ground irrigation system work?

Most commercial and residential irrigation systems are “in ground” systems. This means that the systems are installed and buried under ground. All pipes, sprinklers, emitters and drippers, and irrigation valves are hidden so it makes for a nice clean landscape design.

Controllers – Zones – Valves

Most irrigation systems are divided into zones. A zone is a single irrigation valve and one or a group of drippers, or sprinklers that are connected by pipes or tubes.

Click here for sprinkler repair in Rowlett TX

Irrigation systems are divided into zones because there is usually not enough pressure and available flow to run sprinklers for an entire yard or sports field at once. Each zone has a solenoid valve on it that is controlled via wire by an irrigation controller. The irrigation controller is either a mechanical or electrical device that signals a zone to turn on at a specific time and keeps it on for a specified amount of time.

Smart Controllers

“Smart Controller” is the modern term for a controller that is capable of adjusting the watering time by itself in response to current environmental conditions, such as our regular drought conditions during the Summer in Rowlett Texas.

The smart controller determines current conditions by means of historic weather data for the local area, a soil moisture sensor that monitors water potential or water content, rain sensor, or in more sophisticated systems satellite feed weather station, or a combination of these.

When a zone comes on, the water flows through the lateral lines and ultimately ends up at the irrigation emitter (drip) or sprinkler heads. Many sprinklers have pipe thread inlets on the bottom of them which allows a fitting and the pipe to be attached to them. The sprinklers are usually installed with the top of the head flush with the ground surface. When the water is pressurized, the head will pop up out of the ground and water the desired area until the valve closes and shuts off that zone. Once there is no more water pressure in the lateral line, the sprinkler head will retract back into the ground. Emitters are generally laid on the soil surface or buried a few inches to reduce evaporation losses.

Common Problems With Irrigation Systems

Under-Irrigation, or irrigation giving only just enough water for the plant, like in drip line irrigation, can give poor soil salinity control which leads to increased soil salinity with consequent build up of toxic salts on soil surface in areas with high evaporation.

Over irrigation because of poor distribution uniformity or management wastes water, chemicals, and may lead to water pollution.

Deep drainage from over-irrigation could cause rising water tables which in some instances will lead to problems of irrigation salinity requiring watertable control by some form of subsurface land drainage.

If you need help with irrigation system planning, installation or need Irrigation System Repair in Rowlett Texas, give us a call today.

We can help you in every stage of all irrigation system related issues.

Check Out our Reviews on Google for Irrigation in Rowlett Texas

Irrigation Caddo Mills TX

Irrigation Caddo Mills Texas

Irrigation Caddo Mills Texas – Irrigation Systems in Caddo Mills TX

Millikens Irrigation can provide you with a professionally designed irrigation system in Caddo Mills Texas and all surrounding areas. We install irrigation systems that efficiently distribute the exact amount of water necessary for your specific landscape.

A well designed irrigation system is as critical for having a healthy landscape and for conservation of water during the Summer months in Texas.

How does an in-ground irrigation system work?

Most commercial and residential irrigation systems are “in ground” systems. This means that the systems are installed and buried under ground. All pipes, sprinklers, emitters and drippers, and irrigation valves are hidden so it makes for a nice clean landscape design.

Controllers – Zones – Valves

Most irrigation systems are divided into zones. A zone is a single irrigation valve and one or a group of drippers, or sprinklers that are connected by pipes or tubes.

Click here for sprinkler repair in Caddo Mills TX

Irrigation systems are divided into zones because there is usually not enough pressure and available flow to run sprinklers for an entire yard or sports field at once. Each zone has a solenoid valve on it that is controlled via wire by an irrigation controller. The irrigation controller is either a mechanical or electrical device that signals a zone to turn on at a specific time and keeps it on for a specified amount of time.

Smart Controllers

“Smart Controller” is the modern term for a controller that is capable of adjusting the watering time by itself in response to current environmental conditions, such as our regular drought conditions during the Summer in Caddo Mills Texas.

The smart controller determines current conditions by means of historic weather data for the local area, a soil moisture sensor that monitors water potential or water content, rain sensor, or in more sophisticated systems satellite feed weather station, or a combination of these.

When a zone comes on, the water flows through the lateral lines and ultimately ends up at the irrigation emitter (drip) or sprinkler heads. Many sprinklers have pipe thread inlets on the bottom of them which allows a fitting and the pipe to be attached to them. The sprinklers are usually installed with the top of the head flush with the ground surface. When the water is pressurized, the head will pop up out of the ground and water the desired area until the valve closes and shuts off that zone. Once there is no more water pressure in the lateral line, the sprinkler head will retract back into the ground. Emitters are generally laid on the soil surface or buried a few inches to reduce evaporation losses.

Common Problems With Irrigation Systems

Underirrigation, or irrigation giving only just enough water for the plant, like in drip line irrigation, can give poor soil salinity control which leads to increased soil salinity with consequent build up of toxic salts on soil surface in areas with high evaporation.

Over irrigation because of poor distribution uniformity or management wastes water, chemicals, and may lead to water pollution.

Deep drainage from over-irrigation could cause rising water tables which in some instances will lead to problems of irrigation salinity requiring watertable control by some form of subsurface land drainage.

If you need help with irrigation system planning, installation or need Irrigation System Repair in Caddo Mills Texas, give us a call today.

We can help you in every stage of all irrigation system related issues.

Check Out our Reviews on Google for Irrigation in Caddo Mills Texas

Irrigation Royse City TX

Irrigation Royse City Texas

Irrigation Royse City Texas – Irrigation Systems in Royse City TX

Millikens Irrigation can provide you with a professionally designed irrigation system in Royse City Texas and all surrounding areas. We install irrigation systems that efficiently distribute the exact amount of water necessary for your specific landscape.

A well designed irrigation system is as critical for having a healthy landscape and for conservation of water during the Summer months in Texas.

How does an in-ground irrigation system work?

Most commercial and residential irrigation systems are “in ground” systems. This means that the systems are installed and buried under ground. All pipes, sprinklers, emitters and drippers, and irrigation valves are hidden so it makes for a nice clean landscape design.

Controllers – Zones – Valves

Most irrigation systems are divided into zones. A zone is a single irrigation valve and one or a group of drippers, or sprinklers that are connected by pipes or tubes.

Click here for sprinkler repair in Royse City TX

Irrigation systems are divided into zones because there is usually not enough pressure and available flow to run sprinklers for an entire yard or sports field at once. Each zone has a solenoid valve on it that is controlled via wire by an irrigation controller. The irrigation controller is either a mechanical or electrical device that signals a zone to turn on at a specific time and keeps it on for a specified amount of time.

Smart Controllers

“Smart Controller” is the modern term for a controller that is capable of adjusting the watering time by itself in response to current environmental conditions, such as our regular drought conditions during the Summer in Royse City Texas.

The smart controller determines current conditions by means of historic weather data for the local area, a soil moisture sensor that monitors water potential or water content, rain sensor, or in more sophisticated systems satellite feed weather station, or a combination of these.

When a zone comes on, the water flows through the lateral lines and ultimately ends up at the irrigation emitter (drip) or sprinkler heads. Many sprinklers have pipe thread inlets on the bottom of them which allows a fitting and the pipe to be attached to them. The sprinklers are usually installed with the top of the head flush with the ground surface. When the water is pressurized, the head will pop up out of the ground and water the desired area until the valve closes and shuts off that zone. Once there is no more water pressure in the lateral line, the sprinkler head will retract back into the ground. Emitters are generally laid on the soil surface or buried a few inches to reduce evaporation losses.

Common Problems With Irrigation Systems

Underirrigation, or irrigation giving only just enough water for the plant, like in drip line irrigation, can give poor soil salinity control which leads to increased soil salinity with consequent build up of toxic salts on soil surface in areas with high evaporation.

Over irrigation because of poor distribution uniformity or management wastes water, chemicals, and may lead to water pollution.

Deep drainage from over-irrigation could cause rising water tables which in some instances will lead to problems of irrigation salinity requiring water table control by some form of subsurface land drainage.

If you need help with irrigation system planning, installation or need Irrigation System Repair in Royse City Texas, give us a call today.

We can help you in every stage of all irrigation system related issues.

Check Out our Reviews on Google for Irrigation in Royse City Texas

Irrigation Greenville TX

Irrigation Greenville Texas

Irrigation Greenville Texas – Irrigation Systems in Greenville TX

Millikens Irrigation can provide you with a professionally designed irrigation system in Greenville Texas and all surrounding areas. We install irrigation systems that efficiently distribute the exact amount of water necessary for your specific landscape.

A well designed irrigation system is as critical for having a healthy landscape and for conservation of water during the Summer months in Texas.

How does an in-ground irrigation system work?

Most commercial and residential irrigation systems are “in ground” systems. This means that the systems are installed and buried under ground. All pipes, sprinklers, emitters and drippers, and irrigation valves are hidden so it makes for a nice clean landscape design.

Controllers – Zones – Valves

Most irrigation systems are divided into zones. A zone is a single irrigation valve and one or a group of drippers, or sprinklers that are connected by pipes or tubes.

Click here for sprinkler repair in Greenville TX

Irrigation systems are divided into zones because there is usually not enough pressure and available flow to run sprinklers for an entire yard or sports field at once. Each zone has a solenoid valve on it that is controlled via wire by an irrigation controller. The irrigation controller is either a mechanical or electrical device that signals a zone to turn on at a specific time and keeps it on for a specified amount of time.

Smart Controllers

“Smart Controller” is the modern term for a controller that is capable of adjusting the watering time by itself in response to current environmental conditions, such as our regular drought conditions during the Summer in Greenville Texas.

The smart controller determines current conditions by means of historic weather data for the local area, a soil moisture sensor that monitors water potential or water content, rain sensor, or in more sophisticated systems satellite feed weather station, or a combination of these.

When a zone comes on, the water flows through the lateral lines and ultimately ends up at the irrigation emitter (drip) or sprinkler heads. Many sprinklers have pipe thread inlets on the bottom of them which allows a fitting and the pipe to be attached to them. The sprinklers are usually installed with the top of the head flush with the ground surface. When the water is pressurized, the head will pop up out of the ground and water the desired area until the valve closes and shuts off that zone. Once there is no more water pressure in the lateral line, the sprinkler head will retract back into the ground. Emitters are generally laid on the soil surface or buried a few inches to reduce evaporation losses.

Common Problems With Irrigation Systems

Underirrigation, or irrigation giving only just enough water for the plant, like in drip line irrigation, can give poor soil salinity control which leads to increased soil salinity with consequent build up of toxic salts on soil surface in areas with high evaporation.

Overirrigation because of poor distribution uniformity or management wastes water, chemicals, and may lead to water pollution.

Deep drainage from over-irrigation could cause rising water tables which in some instances will lead to problems of irrigation salinity requiring watertable control by some form of subsurface land drainage.

If you need help with irrigation system planning, installation or need Irrigation System Repair in Greenville Texas, give us a call today.

We can help you in every stage of all irrigation system related issues.

Check Out our Reviews on Google for Irrigation in Greenville Texas

Irrigation Rockwall TX

Irrigation Rockwall Texas

Irrigation Rockwall Texas – Irrigation Systems in Rockwall TX

Millikens Irrigation can provide you with a professionally designed irrigation system in Rockwall Texas and all surrounding areas. We install irrigation systems that efficiently distribute the exact amount of water necessary for your specific landscape.

A well designed irrigation system is as critical for having a healthy landscape and for conservation of water during the Summer months in Texas.

How does an in-ground irrigation system work?

Most commercial and residential irrigation systems are “in ground” systems. This means that the systems are installed and buried under ground. All pipes, sprinklers, emitters and drippers, and irrigation valves are hidden so it makes for a nice clean landscape design.

Controllers – Zones – Valves

Most irrigation systems are divided into zones. A zone is a single irrigation valve and one or a group of drippers, or sprinklers that are connected by pipes or tubes.

Click here for sprinkler repair in Rockwall TX

Irrigation systems are divided into zones because there is usually not enough pressure and available flow to run sprinklers for an entire yard or sports field at once. Each zone has a solenoid valve on it that is controlled via wire by an irrigation controller. The irrigation controller is either a mechanical or electrical device that signals a zone to turn on at a specific time and keeps it on for a specified amount of time.

Smart Controllers

“Smart Controller” is the modern term for a controller that is capable of adjusting the watering time by itself in response to current environmental conditions, such as our regular drought conditions during the Summer here in Rockwall Texas.

The smart controller determines current conditions by means of historic weather data for the local area, a soil moisture sensor that monitors water potential or water content, rain sensor, or in more sophisticated systems satellite feed weather station, or a combination of these.

When a zone comes on, the water flows through the lateral lines and ultimately ends up at the irrigation emitter (drip) or sprinkler heads. Many sprinklers have pipe thread inlets on the bottom of them which allows a fitting and the pipe to be attached to them. The sprinklers are usually installed with the top of the head flush with the ground surface. When the water is pressurized, the head will pop up out of the ground and water the desired area until the valve closes and shuts off that zone. Once there is no more water pressure in the lateral line, the sprinkler head will retract back into the ground. Emitters are generally laid on the soil surface or buried a few inches to reduce evaporation losses.

Common Problems With Irrigation Systems

Underirrigation, or irrigation giving only just enough water for the plant, like in drip line irrigation, can give poor soil salinity control which leads to increased soil salinity with consequent build up of toxic salts on soil surface in areas with high evaporation.

Overirrigation because of poor distribution uniformity or management wastes water, chemicals, and may lead to water pollution.

Deep drainage from over-irrigation could cause rising water tables which in some instances will lead to problems of irrigation salinity requiring watertable control by some form of subsurface land drainage.

If you need help with irrigation system planning, installation or need Irrigation System Repair in Rockwall Texas, give us a call today.

We can help you in every stage of all irrigation system related issues.

Check Out our Reviews on Google for Irrigation in Rockwall Texas

Sprinkler Repair in Greenville TX

Sprinkler Repair in Greenville TexasSprinkler Repair – Sprinkler System Repair

Milliken’s sprinkler services provides all types of sprinkler repair in Greenville Texas.

We provide everything from preventive maintenance, system check-ups and tune-ups to full system replacements.

We are a fully licensed irrigation company who specializes in both commercial sprinkler repair and residential sprinkler repair.

Our technicians are trained to quickly identify any problems you may have with your sprinkler system and provide you with an affordable solution.

Our Lawn Sprinkler Repair Services in Greenville include:
  • Sprinkler Head Repair
  • Sprinkler Pipe Repair
  • Timer Repair
  • Backflow Certification
  • Sprinkler System Repairs of All Types
  • All Brands Serviced: Irritrol, Rainbird, Weathermatic, Toro

If you need repairs for your sprinkler system, call the licensed professionals at Milliken’s Irrigation and Lawn Maintenance to provide you with expert sprinkler repair services in Greenville Texas.

See our other Irrigation Services in Greenville Texas

Call Us Today!

(214) 478-6335

Sprinkler Service that you can count on!

 

Sprinkler Repair in Caddo Mills TX

Sprinkler Repair in Caddo Mills TexasSprinkler Repair – Sprinkler System Repair

Milliken’s sprinkler services provides all types of sprinkler repair in Caddo Mills Texas.

We provide everything from preventive maintenance, system check-ups and tune-ups to full system replacements.

We are a fully licensed irrigation company who specializes in both commercial sprinkler repair and residential sprinkler repair.

Our technicians are trained to quickly identify any problems you may have with your sprinkler system and provide you with an affordable solution.

Our Lawn Sprinkler Repair Services in Caddo Mills include:
  • Sprinkler Head Repair
  • Sprinkler Pipe Repair
  • Timer Repair
  • Backflow Certification
  • Sprinkler System Repairs of All Types
  • All Brands Serviced: Irritrol, Rainbird, Weathermatic, Toro

If you need repairs for your sprinkler system, call the licensed professionals at Milliken’s Irrigation and Lawn Maintenance to provide you with expert sprinkler repair services in Caddo Mills Texas.

Call Us Today!

(214) 478-6335

Sprinkler Service that you can count on!

 

Irrigation and Sprinkler Repair in Dallas Texas

Irrigation System Repair Dallas Texas

Irrigation Repair in Dallas – Sprinkler Repair in Dallas

Milliken’s sprinkler services provides all types of irrigation and sprinkler repair in Dallas Texas.

We provide everything from preventive maintenance, system check-ups and tune-ups to full sprinkler system replacements.

We are a fully licensed irrigation repair company who specializes in both commercial irrigation repair and residential irrigation repair in Dallas TX.

Our technicians are trained to quickly identify any problems you may have with your irrigation system and provide you with an affordable solution.

irrigation repair in Dallas TexasOur Irrigation System Repair Services in Dallas include:
  • Backflow Certification
  • Irrigation Repair
  • Drip Irrigation Repair
  • Lawn Irrigation
  • Irrigation Valve Repair
  • Irrigation Box Repair
Our Sprinkler Repair Services in Dallas include:

Dallas Irrigation repair

  • Sprinkler Head Repair
  • Sprinkler Pipe Repair
  • Timer Repair
  • Check & Adjust Sprinkler Systems
  • Raise and Lower Sprinkler Heads
  • Electronic Sprinkler Valve Location
  • Add On Sprinkler Heads
  • Repair Broken Sprinkler Pipes
  • Sprinkler Controller/Timer Replacement
  • Sprinkler Wiring Problems
  • Sprinkler Irrigation Coverage Problems
  • Sprinkler Rain and Freeze Sensor Installation
  • Double Check Assembly Replacement
  • Sprinkler System Repairs of All Types
  • All Brands Serviced; Irritrol, Rainbird, Weathermatic, Toro
  • Fix Leaking Sprinklers

A leaky sprinkler can waste water by not distributing water effectively. The puddles caused by leaking sprinklers can also cause erosion.

When too much sand or dirt is over the top of the sprinkler head it causes the sprinkler to have to work harder. In time the dirt can become stuck in the sprinkler shaft resulting in it becoming stuck in the up position where it is vulnerable to lawnmower blades, bicycle wheels, etc.

Gears or other components inside rotator sprinklers going bad often calls for the whole sprinkler itself to be replaced.

Sometimes when sprinkler systems are put in they may be placed too close to the sidewalk or the edge of the yard. This becomes a problem over the summer when trimming and lawn grooming is done as it can get in the way of edgers, weed eaters, etc.

This can be remedied by just simply a matter of moving the sprinkler head over a few inches so it isn’t harmed. If the sprinkler is placed too high in the lawn then it needs to be lowered. It can also lead to leaks in the elbow joint underneath the ground which then can become more than just sprinkler head repair.

When summer is in full swing and your lawn is looking greener than green you will be happy that you took the time to take care of your sprinklers.

If you need repairs for your sprinklers or irrigation system, call the licensed professionals at Milliken’s Irrigation and Lawn Maintenance to provide you with expert irrigation and sprinkler repair services in Dallas Texas.

Call Us Today!

(214) 478-6335

Dallas Irrigation and Sprinkler Repair that you can count on!

 

Sprinkler & Irrigation SystemsSprinkler Repair and Irrigation in Dallas Texas

Lawn Service & Lawn MowingLawn Service and Tree Trimming Dallas TX

FirewoodFirewood in Dallas TX

Landscape LightingLandscape Lighting in Dallas Texas

Irrigation and Sprinkler Repair in Allen Texas

Irrigation System Repair Allen Texas

Irrigation Repair in Allen – Sprinkler Repair in Allen

Milliken’s sprinkler services provides all types of irrigation and sprinkler repairs in Allen Texas.

We provide everything from preventive maintenance, system check-ups and tune-ups to full sprinkler system replacements.

We are a fully licensed irrigation repair company who specializes in both commercial irrigation repair and residential irrigation repair in Sunnyvale TX.

Our technicians are trained to quickly identify any problems you may have with your irrigation system and provide you with an affordable solution.

irrigation repair in Allen TexasOur Irrigation System Repair Services in Allen include:
  • Backflow Certification
  • Irrigation Repair
  • Drip Irrigation Repair
  • Lawn Irrigation
  • Irrigation Valve Repair
  • Irrigation Box Repair
Our Sprinkler Repair Services in Allen include:

Allen Irrigation repair

  • Sprinkler Head Repair
  • Sprinkler Pipe Repair
  • Timer Repair
  • Check & Adjust Sprinkler Systems
  • Raise and Lower Sprinkler Heads
  • Electronic Sprinkler Valve Location
  • Add On Sprinkler Heads
  • Repair Broken Sprinkler Pipes
  • Sprinkler Controller/Timer Replacement
  • Sprinkler Wiring Problems
  • Sprinkler Irrigation Coverage Problems
  • Sprinkler Rain and Freeze Sensor Installation
  • Double Check Assembly Replacement
  • Sprinkler System Repairs of All Types
  • All Brands Serviced; Irritrol, Rainbird, Weathermatic, Toro
  • Fix Leaking Sprinklers

A leaky sprinkler can waste water by not distributing water effectively. The puddles caused by leaking sprinklers can also cause erosion.

When too much sand or dirt is over the top of the sprinkler head it causes the sprinkler to have to work harder. In time the dirt can become stuck in the sprinkler shaft resulting in it becoming stuck in the up position where it is vulnerable to lawnmower blades, bicycle wheels, etc.

Gears or other components inside rotator sprinklers going bad often calls for the whole sprinkler itself to be replaced.

Sometimes when sprinkler systems are put in they may be placed too close to the sidewalk or the edge of the yard. This becomes a problem over the summer when trimming and lawn grooming is done as it can get in the way of edgers, weed eaters, etc.

This can be remedied by just simply a matter of moving the sprinkler head over a few inches so it isn’t harmed. If the sprinkler is placed too high in the lawn then it needs to be lowered. It can also lead to leaks in the elbow joint underneath the ground which then can become more than just sprinkler head repair.

When summer is in full swing and your lawn is looking greener than green you will be happy that you took the time to take care of your sprinklers.

If you need repairs for your sprinklers or irrigation system, call the licensed professionals at Milliken’s Irrigation and Lawn Maintenance to provide you with expert irrigation and sprinkler repair services in Allen Texas.

Call Us Today!

(214) 478-6335

Irrigation and Sprinkler Repair in Allen that you can count on!

 

Sprinkler & Irrigation SystemsSprinkler Repair and Irrigation in Allen Texas

Lawn Service & Lawn MowingLawn Service and Tree Trimming Allen TX

FirewoodFirewood in Sunnyvale TX

Landscape LightingLandscape Lighting in Allen Texas


Milliken's Irrigation and Lawn Maintenance
(214) 478-6335
2850 Shoreline Trail, Suite 98
Rockwall, Texas 75032

License #19451

Serving: Addison - Allen - Carrollton - Caddo Mills - Coppell - Dallas - Emory - Farmers Branch - Farmersville - Fate - Frisco
Garland - Greenville - Highland Park - Highland Village - Josephine - Heath - Lake Highlands - Lake Tawakoni - Lavon - Lone Oak - Lucas
Mesquite - Murphy - Parker - Plano - Princeton - Quinlin - Rockwall - Rowlett - Royse City - Sachse - Sulpher Springs - University Park - Wylie


Google Plus - Sitemap - Privacy - Lawn Services - Spinklers / Irrigation - Landscape Lighting - Firewood - Contact - Milliken's Home
Copyright © 2014 Milliken's Irrigation and Lawn Maintenance
Ed Daniels SEO Website Design.